Copper Compression Long Barrel Connector

Long Barrel In-Line Connectors

Long Barrel connectors permit additional crimp for added mechanical strength and dimple at The Center of Connector acts as a stopper for the conductors this assures that the conductors are inserted fully and equally before crimping. Internal end chamfer allows easy conductor crimping. Internal end prevents sharp edge contact with conductor.

MATERIAL :

COPPER to BS 1977

COPPER CONDUCTIVITY :

99.25% IACS (International Annealed Copper standard)

FINISH :

Electro-Tin plated to prevent corrosion and improve conductivity.

SALIENT FEATURES :

Barrel Entrance Chamfered at both ends to facilitate cable insertion smoothly and easily.

Center stop assures proper conductor positioning before crimping as well as acts as cable stopper.

Connectors are fully annealed for secured crimping.

Cable Size mm²	Dimensions mm			MARS Cat No.
Cable Size mm²	ØA	C	J	MARS Cat No.
1.5	1.8	3.7	22	ML 1.5
2.5	2.4	4	22	ML 2.5
4	3.1	4.8	22	ML 4
6	3.8	5.5	22	ML 6
10	4.5	6.2	22	ML 10
16	5.4	7.1	44	ML 16
25	6.8	8.8	47	ML 25
35	8.2	10.6	47	ML 35
50	9.5	12.4	47	ML 50
70	11.2	14.7	50	ML 70
95	13.5	17.4	54	ML 95
120	15	19.4	65	ML 120
150	16.5	21.2	65	ML 150
185	18.5	23.5	65	ML 185
240	21	26.5	89	ML 240
300	23.5	30	89	ML 300
400	28.5	36.5	90	ML 400
500	30	39	115	ML 500
550	31.7	41.5	115	ML 550
630	35	45	115	ML 630
800	39	50.6	230	ML 800
1000	43	56.2	230	ML 1000

Note:

Exhibited are standard length of connectors and can be provided in different length.
Bell Mouthed entry available on request from 10 mm² to 400 mm².